NanoMaterials Technology Co., Ltd. -

NanoMaterials Technology Co., Ltd.

Showing 1 - 9 of 9, total 1 pages [First] [Previous] [Next] [Last]

npcc-602 for adhesives
Specification: 15-40nm
Detail: Our NPCC-602 for adhesives is characterized by small and even particle size, big surface area, and high in DOP adsorption and low moisture content, etc. It is widely used in PU and silicone adhesives. Advantages as follows: ...

npcc-401 for offest ink
Specification: 15-40nm
Detail: Special ink with ultra-fine nano calcium carbonate, ultra-pure features, the production process to control the crystal shape and the size and surface of the product by the dispersant resin acids and special surface modificatio...

npcc-501 natural and synthetic rubber
Specification: 15-40nm
Detail: Nano calcium carbonate (Nano-precipitated calcium carbonate<NPCC>), as a function of nano-reinforced material, has been successfully applied in chloroprene rubber (CR), chlorinated polyethylene (CM), chloroprene compound (allo...

npcc-202 for pvc profile application
Specification: 15-40nm
Detail: NPCC-202 is based on Nano Precipitated Calcium Carbonate and especially designed for PVC profile application. It is coated by a very special high molecular weight organic material, which is very close to the molecular weight o...

npcc-201 for pe/pp plastic
Specification: 15-40nm
Detail: Nano calcium carbonate (Nano-precipitated calcium carbonate<NPCC>) is a new type nano-specific activity product special for plastic, rubber. NPCC with small particle size, narrow size distribution, surface area, high chemical ...

npcc-111 for paermaking and paint (water soluble)
Specification: 15-40nm
Detail: FOR PAPERMAKING: Because NPCC has low oil absorption, fine and uniform particles, good dispersion, high whiteness, low hardness, small and non-toxic wear, odorless, tasteless, and good dispersion etc., in the paper industry, ...

npcc-102 for medical gloves
Specification: 15-40nm
Detail: Natural rubber latex products, especially very thin flexible products, such as latex gloves, are basically the model with deposition on the type and made of latex drying off. The cost of raw materials for these products is mai...

npcc-101 for chassis paint (pvc plastisol)
Specification: 15-40nm
Detail: Because of NPCC-101 (Nano calcium carbonate<Nano-precipitated calcium carbonate>) nanometer size effect, large specific surface area, surface atoms at a high activation state and the interface with the polymer has a high inter...

nano-precipitated calcium carbonate
Specification: 15-40nm
Detail: Our co***ny is the main manufature of NPCC in China. The particle size of NPCC is 15-40nm, it can be widely used in PVC profile, PVC/PP/PE plastic, adhesives, silicone adhesvie, offset ink,painting, rubber, papermaking and so ...


Showing 1 - 9 of 9, total 1 pages [First] [Previous] [Next] [Last]
1